How To Install Drawer Pulls

Get a Grip! Easy Drawer Pull Installation Tips

Introduction:

Are you a DIY enthusiast, but struggle with installing drawer pulls? Don’t worry, you’re not alone! Drawer pulls might seem like a small detail, but they can make a big difference in the overall look and functionality of your furniture. In this article, we’ll share some easy tips to help you install drawer pulls like a pro.

Grip it and Rip it: Easy Drawer Pull Installation Tips

Installing drawer pulls can be tricky if you don’t have the right tools or know-how. But with these easy tips, you’ll be able to tackle this project in no time.

First, measure the distance between the two holes on your drawer or cabinet. Make sure to measure accurately, as the holes need to be aligned properly for the pull to be installed correctly. Once you have the measurement, mark the spot on the drawer with a pencil or masking tape.

Next, drill a hole through the marked spot. Use a drill bit that matches the diameter of the screws that came with your drawer pull. Make sure to drill straight and stop when the bit reaches the other side of the drawer.

Finally, attach the pull to the drawer by screwing in the screws through the holes on the pull and into the holes you just drilled. Make sure the pull is centered and tightened securely. And just like that, your drawer pull installation is complete!

Don’t Pull Your Hair Out: Quick and Easy Drawer Pull Installation

If you don’t have a drill or don’t want to bother with measuring and drilling, there’s an even easier way to install drawer pulls. All you need is some adhesive putty, which you can find at most hardware stores.

First, clean the surface of your drawer where you want to attach the pull. Then, roll a small amount of putty into a ball and place it on the back of the pull.

Press the pull firmly onto the surface of the drawer, making sure it’s centered and level. Hold it in place for a few seconds to let the putty set.

And that’s it! This method is quick, easy, and doesn’t require any special tools. Plus, if you ever want to remove the pull, you can simply twist it off and clean up the putty residue with some rubbing alcohol.

Conclusion:

With these easy tips, you’ll be able to install drawer pulls like a pro in no time. Whether you prefer the traditional drill and screw method or the quick and easy adhesive putty method, getting a grip on your drawer pulls has never been simpler! So go ahead, give your furniture a makeover and enjoy the new and improved look and functionality.